The Problem
(continued)
PROBLEM
I
SNAGS, HOLES,
As Permanent Press garments
they may
fraying
cuffs. This is
TEARS,
normal due
of
Permanent Press process. It is not caused by
washer. You can slow this process by
Permanent Press loads with a
WEAR
Water
wash
items
as
with
Press. Remove
(continued)
collar stays, when possible.
. Roughness or
agitator may
rips or
agitator and file rough
spots if
* Maybe
by use of
Wash/Spin
articles. Use
Wash/Spin speed.
Garment Manufacturers’ Care Labels.
weakened@ age, sun atmosphere. This is inevitable
is
caused
by washer. Slow
by washing on
WA/Spin s@.
●
Too large loads, or too
washer
with
of items that
move freely.
correct
level.
such as
I
Pretreat with liquid
and cuffs
WASHER WON’T
Make
cord is plugged into outlet.
OPERATE
●
Make sure both hot and cold faucets are turned
Make sure controls are set and cycle selector knob is pulled out to
position.
* Make sure lid is closed. Washer will
but will not spin or agitate with lid open.
Check house
or circuit breakers. another appliance is sharing the electrical
outlet, remove it. Washer should have separate outlet.
WATER
●
Make sure temperature selector controls are
TEMPERATURE
properly set.
IS
●
Make sure hot and cold faucets are turned on
and regulated correctly.
o
●
Make sure hoses are connected to correct
faucets.. hot to hot, cold to cold.
. Water valve screens may be stopped up. Remove inlet hoses from
water valve. Clean the screens and
hoses.
●
Check household water heater to make sure it is delivering
at 140° to
24