Hotpoint WK 30I UK, Руководство по эксплуатации

Страница: 4 / 8

44
en
BEFORE FIRST USE
Carefully wipe the outside of the appliance to remo-
ve any dust that may have accumulated. Dry with a
clean cloth. Do not immerse the supply cord in water
or other liquids. If you are using the kettle for the first
time, it is recommended that you clean it before use
by boiling a full kettle of water twice and discarding
the water, using the Instant kettle until the water has
been used.
USING YOUR INSTANT
KETTLE
1. To fill the kettle, remove it from the power base
and open the lid by pressing Lid release button,
fill the water tank with the desired amount of wa -
ter, and then close the lid. The water level must
be within the Min and the Max level. Too little
water will cause the kettle switching off before
the water has boiled.
The max capacity of the kettle is 1.5L. Do
not add water over the maximum level, as it
may spill out of the spout when boiling. Ensure
that the lid is firmly in place before connecting the
plug into a power outlet.
Ensure that the lid is firmly in place before
plugging into power outlet.
2. Position the kettle on the power base. Make sure
it is positioned properly.
3. Place your cup on the drip tray grille. Make sure
it aligns with the spout.
When to choose the size of cup, it is recom-
mended the capacity of the cup shall not be
less than 250ml as the water output from spout is
set 250ml for one cup by the system. Make sure
the cup is positioned in place before using.
4. Connect the plug into power outlet, press down
the On buton: the product will start to boil the
water.
5. After a while, hot water will flow out from the
spout, and then the On button will switch off au-
tomatically.
Before removing cup, make sure water has
stopped dispensing.
During boiling, the operation can be stop-
ped by pressing the Stop button at any time,
• Do not operate the appliance without anything in
it to avoid damaging the heating elements.
• Ensure that the kettle is used on a firm flat surfa -
ce out of the reach of children. This will prevent
the kettle from overturning and causing damage
or injury.
• As a protection against fire, electric shocks or
personal injury, do not immerse the cord, electric
plugs or kettle in water or other liquids.
• While the water is boiling or just after the water
has boiled, avoid any contact with the steam.
• Be careful when refilling a hot kettle.
• The attached base cannot be used for any other
purpose than its intended use.
• Extreme caution must be used when moving an
appliance containing hot water.
• The use of accessory attachments that are not
recommended by the appliance manufacturer,
may result in fire, electric shocks or personal
injury.
• Unplug the kettle from the outlet when not in
use and before cleaning. Allow the kettle to cool
down before installing / removing any parts and
before cleaning it.
• If the supply cord is damaged, have it replaced
by the manufacturer or its service agent or a si-
milarly qualified person in order to avoid hazards.
• This appliance has a built-in grounded plug.
Make sure the wall outlet in your house is pro-
perly earthed.
• Do not use the appliance for any other purpose
than its intended use.
• Always make sure that the appliance is in good
working order and that all its removable parts are
secure. Regularly check the power supply cord
and plug for cuts or damage.
• Be sure your hands are completely dry before
touching the switch.
• Risk of scalding: the kettle gets hot during use.
Therefore use only the handle to pick it up and
open the lid only after the kettle has cooled down.
• Do not use the appliance near the water in baths,
sinks or other containers.
• Only fill the kettle with water. Milk and instant
beverages will burn and damage the appliance.
• The kettle can only be used with the stand pro-
vided.
• While water is boiling, or just after the water has
been boiled, avoid contact with steam from the
spout.
• Before pressing the on button, please make sure
your cup is underneath the spout.