Hotpoint WK 30I UK, Руководство по эксплуатации

Страница: 5 / 8

55
en
while the indicator will go out.
The water flowing out from spout is very hot,
handle carefully and never touch it with hand
to avoid scalding.
6. If you want to boil water again, only press down
the Power switch again to restart the kettle.
7. The kettle may be stored on the power base
when not in use. Always disconnect the power
supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without
water, the boil-dry protection will automatically switch
off the power. If this occurs, allow the kettle to cool
down before filling with cold water.
CLEANING AND
MAINTENANCE
Always disconnect the appliance from the power
outlet before cleaning.
1. Never immerse the kettle, power cord or power
base in water and never allow moisture to get in
contact with these parts.
2. Wipe the outside of the body with a damp cloth
or cleaner. Never use a hazardous cleaner.
Do not use chemical, steel, wooden or abra-
sive cleaners or brushes to clean the outside
of the kettle to prevent any gloss loss.
EMPTYING YOUR KETTLE
1. After your kettle has completely cooled down,
unplug it from the mains supply socket.
2. Press the Lid release button and hold your kettle
sideways over a sink. Then, tip your kettle upsi-
de down.
3. Still holding your kettle over the sink, turn it the
right side up and allow any water to drain out of
the spout.
4. Repeat step 2 and 3 until the water has been
emptied from your kettle.
5. If your kettle will not be used for an extended
period (e.g. if you are on holiday), it’s recom-
mended that emptying it firstly. Before using your
kettle again, carry out several boil cycles and di-
scard the water each time.
REMOVAL OF MINERAL
DEPOSITS
To maintain its performance, your kettle will require
descaling every three months or so. If you live in a
hard water area, the kettle may need to be descaled
more frequently.
1. Fill your kettle to the MAX level and place an
empty cup on the drip tray. Press down the Po-
wer switch and wait for the water to be dispen-
sed into the cup.
2. Add a citric acid-based proprietary descaling
product to the hot water in the cup and stir.
3. Tip the contents of the cup into the water tank
and close the lid.
4. Place the empty cup on the drip tray and press
down the Power switch.
5. Wait for the water to be dispensed into the cup.
6. Discard the water from the cup.
7. Repeat steps 4, 5 and 6 until the water level is
at the MIN mark. Open the lid and empty any
remaining water into the sink. Rinse your kettle
by filling it with clean water and emptying it into
the sink.
8. Fill your kettle with fresh water to the MAX level
and place an empty cup on the removable shelf.
9. Press down the Power switch and wait for the
water to be dispensed into the cup.
10. Discard the water in the cup.
11. Repeat steps 8 and 9 until the water level is at
the MIN mark. Open the lid and empty any re-
maining water into the sink.
GUARANTEE
12 months Parts and Labour Guarantee
This certificate of guarantee represents the guarantee (“Guarantee” he -
reinafter) offered by Indesit Company UK Limited with registered office
at Peterborough PE2 9JB in relation to products purchased in the United
Kingdom and Indesit Ireland Limited with registered office in Dublin 9,
Ireland for products purchased in the Republic of Ireland. This Guaran
-
tee does not affect your statutory rights.
Your product has the benefit of our manufacturer’s Guarantee, which
covers the product for twelve months from the date of purchase.
This gives you the reassurance that if, within that time, your product
is proven to be defective because of either workmanship or materials,
we will, at our discretion, either repair or replace the product at no cost
to you.
This Guarantee is subject to the following conditions:
•
Documentary proof of original purchase date is provided.
• Cosmetic damage must be reported within 14 days from the date
of purchase.
• The product has been installed and operated correctly and in ac-
cordance with our operating and maintenance instructions.