Hotpoint WD640, Инструкция по эксплуатации

Страница: 8 / 16

7
Optional Features
Button selection:
1. press the button corresponding to the desired
option, according to the table below.
2. the option is selected when the corresponding
light is illuminated.
Reducing the temperature
You can reduce the wash temperature below the
maximum for the wash programme you have chosen.
Each press of the ‘Wash Temperature’ button will
reduce the wash temperature by 5˚C. The new wash
temperature will be shown in the display.
If you press again after ‘OFF’ has been displayed, the
machine will revert to the original wash temperature.
Personalisation
Option Effect Comments
Available with
programmes
B,C,D,E,F
& M Drying High
Heat
Allows you to
select HIGH heat
for tumble
drying.
Default is LOW heat .
C, E, G
plus
Rinse and Spin
Reduce
Creases
Reduces wash
action and spin
speed.
Meaning less ironing for delicate clothes.
B, C, D, F, G, J
plus
Rinse and Spin
Rinse Hold
Clothes will be
held in the final
rinse water,
keeping them
fresh until you are
ready to complete
the programme.
Complete the final spin by pressing the Rinse Hold button
when the light is flashing.
B, D and G
Time Saver
Reduces
programme time.
Saves up to a third on the programme time.
B, C, D, E, F, G
plus
Rinse and Spin
Time Delay
To delay the start
of the wash
programme by
up to 24 hours Each press of the option button will add a delay of one hour.
If you press after 24 shows on the display, the machine will reset
the time delay and ‘OFF’ will appear in the display. Any press
after this will start the time delay again from one hour.
The display will show the delay you have chosen.
Option table
GB
! Do not allow children to play with the appliance or
tamper with the controls.
! Do not overload the appliance. It may damage the
laundry and reduce the quality of the wash.
! When in operation, remember that the door glass
may become hot to the touch.
! Do not open the dispenser drawer during any
programme.
! Do not try to open the door when the DOOR
LOCKED indicator light is on.
! If you stop a programme part way through a wash or
there is a power cut, take care when opening the door
the machine may contain hot water.
Automatic features
Auto half load:
Auto half load saves you time and money when
washing smaller loads.
Water levels are automatically adjusted to cater for the
different loads.
Unbalanced load:
Your machine has an inbuilt feature to prevent it
spinning with an unbalanced load. If the machine is
unable to balance the load it will abort the spin
process.
If this safety feature is encountered you can spin the
load, after first opening the door, redistributing the
load and selecting a spin only programme.