Hotpoint RB787, Инструкция по использованию и уходу

Страница: 9 / 36

SURFACE UNIT CONTROLS
Cooking with Infinite Heat Controls
At both OFF HI
positions,”
there is slight
Switching higher settings shows
so control “clicks’. those positions; on the quicker change than switching lower settings.
HI the highest setting; the lowest setting is
the word LO. In kitchen you
cooking, indicating
settings selected being
How to Set the Controls
1. Push in.
2. Turn either clockwise or
counterclockwise to the
setting.
The control must be pushed in to set only from
the OFF position. When the control is in any
position other than OFF, it may be turned without
pushing in.
Be
sure turn
the control to OFF when
An indicator light will glow when ANY surface
unit is on.
Cooking Guide for Using Heat Settings
—
cooking; to boil.
Medium between HI
try,
brown: boil on
Medium 1,ow-(Setting
LO)
i n covered
s i m m e r i n g .
temperatures increase with the number
Nor
r
E:
●
At HI, High never
Boil
on
●
At i Low, LO
unit.
●
When
it is on, the
be
within
The
(cycling) to
n
the
setting, With
cycling the unit Good.
will minimize the cycling.
Tips
of surface that are on. With or 4 units
●
is oven or
turned on, surface temperatures are so be
the
when it is cool.
careful when touching ’hot surface
indicator will remain lit after the surface unit
is off’ until the surface is cool enough to touch.
OFF
LO
●
o
Medium
● ●
Low
●
Medium
High
9“