Hotpoint RB787, Инструкция по использованию и уходу

Страница: 8 / 36

INSTALLING YOUR RANGE
Your range, like many other household items, is
Please check your to packaging
heavy and can settle into soft floor coverings such as
materials and protective tape covering are removed
cushioned vinyl or carpeting. When moving the
areas, such as the trim, frame,
this type it should be installed on
caps, etc., using.
a l/4-inch-thick sheet plywood (or similar material)
as follows:
the area that the range will rest on should be
up with plywood to the same level or higher than
covering. This will the range to be
moved cleaning or servicing. For complete
information, see Installation Instructions.
Leveling the Range
Leveling screws are located on each corner the
One of the leveling screws will the
base the range. Remove the bottom drawer and
device (allow some side to side
can
the on an uneven with the
Allow a minimum 1/8” between the
use a
and the leveling screw that is to be installed into
To remove drawer, pull out the way, tilt
Anti-Tip device.
up take it out. To replace drawer, insert
back beyond stop on range glides.
Lift drawer necessary to insert easily. Let of
down, then push in to close.
8