17 of 37
Indesit
Company
Service Manual UK
English
Control Panel Interface
(mounted above dispenser assembly)
Example
above shows
Sequence
'07'
of the Auto Test in the freezer temperature display and
fault
code
'7'
to
'0'
flashing alternatively in the fridge temperature display.
•
Check evaporator heater / connections.
Fault conditions:
are signalled to the engineer during Auto Test.
See chart below for AUTO TEST fault codes and explanations.
Note:
If two or more fault codes have been recognised, they will display alternately at 1 second
intervals.
TEMPERATURE DISPLAY
Fridge
AUTO-TEST FAULT CODE
(explanations)
8
to
0
flashing alternatively
Relay K008 on module faulty (for Damper)
Evaporator Defrost Heater - resistance can be obtained from
power module 12PIN block term 1 & 16PIN block term 1
7
to
0
flashing alternatively
6
to
0
flashing alternatively
Fridge Sensor (thermistor)
5
to
0
flashing alternatively
Freezer Sensor (thermistor)
4
to
0
flashing alternatively
Evaporator Fan
3
to
0
flashing alternatively
Condenser Fan
2
to
0
flashing alternatively
Damper (baffle)
9
to
0
flashing alternatively
Water Valve for Icemaker
H
to
0
flashing alternatively
Icemaker (Sankyo)
1
to
0
flashing alternatively
Water Valve for Water Dispenser
