Hotpoint AQUALTIS AQSD 291 U, Инструкция по установке и эксплуатации

Страница: 7 / 72

EN
7
Wash options
Super Wash
This option offers a high-
performance wash due to
the greater quantity of water
used in the initial phase
of the cycle, and due to
the increased wash cycle
duration, is particularly useful
for the removal of stubborn
stains. It can be used
with
or
without
bleach. If you desire
bleaching, insert the extra
tray compartment ( 3 ) into
compartment 1 . When pouring in the bleach, be careful
not to exceed the “max” level marked on the central pivot
(see figure). To bleach laundry without carrying out a full
wash cycle , pour the bleach into the extra compartment 3 ,
select the “Rinse” cycle and activate the “Super Wash”
option .
! It cannot be used in conjunction with
, , , , ,
, , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
For the Silk wash cycle, the machine will end the cycle
while the laundry is soaking and the “Easy Iron” indicator
light will flash. To drain the water so that the laundry may
be removed, press the START/PAUSE button or the “Easy
Iron” button.
!
It cannot be used in conjunction with
, , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with
, , , , ,
, , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
! It cannot be used in conjunction with
, , .
3
1
2
Wash cycles and options
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation 1061/2010: set wash cycle with a temperature of 60°C and 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used
for garments which can be washed at 60°C and 40°C. The actual washing temperature may differ from the indicated value.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
Icon
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle dura-
tion
Pr
ewash
W
ash
Fabric
softener
Bleach
Cottons wash cycles
Cotton with pre-wash
(Add detergent to the relevant compartment).
90° 1200
  
- 6 53 1,81 65 150’
Cotton: heavily soiled whites and resistant colours. 90° 1200 -
  
6 53 1,80 58 140’
Cotton (1): heavily soiled whites and resistant colours. 60° 1200 -
  
6 53 1,01 51 189’
Cotton (1-2): heavily soiled whites and delicate colours. 40° 1200 -
  
6 53 0,99 82 175’
Coloured
Cotton (3)
40° 1200 -    6 53 0,64 50 85’
Shirts 40° 600 -
  
2 - - - 65’
Jeans
40° 800 -   - 2,5 - - - 70’
Special programmes
Baby: heavily soiled delicate colours
40° 800 -
  
2 - - - 120’
Durable Synthetics
60° 800
-
   2,5 44 0,70 40 100’
Delicate Synthetics 40° 800 -
  
2,5 44 0,47 38 90’
"Bed & Bath" for bedlinen and towels. 60° 1200 -
  
6 - - - 95’
Quilted Jacket: for down-stuffed garments. 30° 1000 -
 
- 1 - - - 95’
Silk: for garments in silk and viscose, lingerie. 30° 0 -
 
- 1 - - - 55’
Wool: for wool, cashmere, etc.
40° 600
-
 
-
1 - - - 55’
Mix 30': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30° 800 -   - 3 71 0,06 39 30’
Partials wash cycles
Rinse
- 1200 - -   6 - - - 36’
Spin - 1200 - - - - 6 - - - 16’
Drain - 0 - - - - 6 - - - 2’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration
can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing
and any wash options selected.