25 of 43
Service Manual UK
Whirlpool UK Appliances Ltd
English
MAINTENANCE & CLEANING
Make sure that the oven has cooled down before carrying out any maintenance or cleaning.
Do not use steam cleaning equipment.
Use protective gloves during all operations.
The oven must be disconnected from the mains before carrying out any kind of maintenance
work.
Do not use wire wool, abrasive scourers or abrasive/corrosive cleaning agents, as these could
damage the surfaces of the appliance.
EXTERIOR SURFACES
•
Clean the surfaces with a damp microfibre cloth. If they are very dirty, add a few drops of
pH-neutral detergent. Finish off with a dry cloth.
•
Do not use corrosive or abrasive detergents. If any of these products inadvertently comes into
contact with the surfaces of the appliance, clean immediately with a damp microfibre cloth.
INTERIOR SURFACES
•
After every use, leave the oven to cool and then clean it, preferably while it is still warm, to remove
any deposits or stains caused by food residues. To dry any condensation that has formed as a
result of cooking foods with a high water content, leave the oven to cool completely and then wipe
it with a cloth or sponge.
•
The door can be easily removed and refitted to facilitate cleaning of the glass.
•
Clean the glass in the door with a suitable liquid detergent.
CLEANING THE COOKING COMPARTMENT WITH THE PYRO CYCLE
DO NOT touch the oven during the Pyro cycle.
Keep children and animals away from the oven during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories from the oven before running the Pyro function.
This function enables you to eliminate cooking spatters using a temperature of approximately 500°C.
At this temperature, food residues turn into deposits that can be easily wiped away with a damp
sponge once the oven has cooked down.
If the oven is installed below a hob, make sure that all the burners or electric plates are switched off
while running the self-cleaning cycle.
For optimum cleaning results, remove the worst soiling with a damp sponge before using the Pyro
function. Only run the Pyro function if the appliance contains heavy soiling or gives off bad odours
during cooking.
The oven has two different pyrolytic cleaning functions: The standard cycle (PYRO) provides thorough
cleaning if the oven is heavily soiled, while the economic cycle (ECO) is shorter than the standard
cycle, which makes it suitable for use at regular intervals.
Only run the Pyro function if the appliance contains heavy soiling or gives off bad odours during
cooking.
Please Note:
The oven door cannot be opened while pyrolytic cleaning is in progress. It will remain
locked until the temperature has returned to an acceptable level. Air the room during and after running
the Pyro cycle.