manualshive.com logo in svg

Hotpoint 96797, Информация о сервисе, Страница: 18 / 43

Поделиться
Скачать
Hotpoint 96797 Скачать руководство пользователя страница 18

18 of 43

Service Manual UK

Whirlpool UK Appliances Ltd

English

DAILY USE

1. SELECT A FUNCTION

When the oven is off, only the time is shown on the display. Press and 
hold 

 to switch the oven on. Turn the knob to view the main functions 

available on the left hand display. Select one and press 

.

To select a sub-function (where available), select the main function and 
then press 

 to confirm and go to the main function menu.

Turn the knob to view the sub-functions available on the right hand display. Select one and press 

 to 

confirm.

2.

SET THE FUNCTION

After having selected the function you require, you can change its settings.

The display will show the setting that can be changed in sequence.

TEMPERATURE / GRILL LEVEL

When the °C / °F icon flashes on the display, turn the knob to change the value, then press 

 to 

confirm and continue to alter the setting that follow (if possible).

You can also set the grill level (3 = high, 2 = medium, 1 = low) at the same time.

Please Note:

 Once the function has started, you can change the temperature of the grill level by 

pressing 

 or by turning the knob directly.

Содержание 96797












































Отзывы:

Нет отзывов