17 of 43
Service Manual UK
Whirlpool UK Appliances Ltd
English
USING THE APPLIANCE FOR THE FIRST TIME
1.
SET THE TIME
You will need to set the time when you switch on the oven for the first time.
The two digits for the hour will start flashing: Turn the knob to set the hour and press
to confirm.
The two digits for the minutes will start flashing: Turn the knob to set the minutes and press
to
confirm.
Please Note:
To change the time at a later point, press and hold
for at least one second while the
oven is off and repeat the steps above.
You may need to set the time again following lengthy power outages.
2.
HEATING THE OVEN
A new oven may release odours that have been left behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore recommend heating the oven with it empty in order to
remove any possible odours.
Remove any protective cardboard or transparent film from the oven and remove any accessories from
inside it.
Heat the oven to 200°C for about one hour, ideally using a function with air circulation (e.g. 'Forced Air'
or 'Convection Bake').
Follow the instructions for setting the function correctly.
Please Note:
It is advisable to air the room after using the appliance for the first time.