Hotpoint 61DGW Instructions for and use, Инструкция по установке и эксплуатации

Страница: 7 / 32

7
Clock/Minute Minder Operation
Here you can set a time period of up to 10 hours, that will count
down. When it reaches zero, the timer will emit an audible tone.
For Example:
If you set 20 minutes, the audible tone will occur 20
minutes later.
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day is set correctly.
Step 2 Press and release the ‘+’ button.
N No otte e:: S Stte ep p 3 3 m mu us stt b be e s stta arrtte ed d w wiitth hiin n 1 10 0 s se ec co on nd ds s,,
o otth he errw wiis se e y yo ou u m mu us stt rre ep pe ea att S Stte ep p 2 2..
Step 3
Press the ‘+’ button to set the required time period.
A ‘Bell’ symbol will light up.
The time period can be adjusted, by using the ‘+’ button
to increase the time period or the ‘-’ button to
decrease the time period.
Release all buttons, the timer display will show the remaining time
period. The ‘Bell’ symbol will remain lit to signify that a time period
has been set.
At the end of the set time an audible tone will be heard and the
‘Bell’ symbol will flash.
Step 4 To cancel the audible tone press the ‘+’ button.
To cancel the minute minder period press the ‘-’ button
until 0.00 is displayed in the window then release the button.
If at any time the display shows flashing zero’s, it is likely that the
electricity supply has been interrupted.
Reset the timer to the correct time of day.
N No otte e:: T Th he e T Tiim me err d diis sp plla ay y w wiillll s sh ho ow w tth he e m miin nu utte e m miin nd de err
p pe erriio od d a as s ffo ollllo ow ws s::
Any period up to 99 minutes and 50 seconds -
The display shows MINUTES and SECONDS (10s intervals)
eg. 19 minutes 50 seconds
Any period between 100 minutes (1 hour 40 minutes) and up
to 10 hours -
The display shows HOURS and MINUTES
eg. 1 hour 41 minutes
0.00
19.50
1.41
0.00