background image

2 of 35

Service Manual UK

Indesit

 

Company

English

SAFETY NOTES & GENERAL SERVICING ADVICE

1.

This manual is NOT intended as a comprehensive repair/maintenance guide to the appliance.

2.

It should ONLY be used by suitably qualified persons having technical competence applicable 
product knowledge and suitable tools and test equipment.

3.

Servicing of electrical appliances must be undertaken with the appliance disconnected (unplugged) 
from the electrical supply.

4.

Servicing must be preceded by Earth Continuity and Insulation Resistance checks.

5.

Personal safety precautions must be taken to protect against accidents caused by sharp edges on 
metal and plastic parts.

6.

After Servicing the appliance must be rechecked for Electrical Safety. In the case of appliances which 
are connected to a water supply (i.e.: Washing Machines, Dishwashers & Food Centres etc.) checks 
must be made for leaks from seals gaskets and pipe work and rectification carried out where 
necessary.

7.

It can be dangerous to attempt ‘DIY’ repairs / maintenance on complex equipment and the Company 
recommends that any problem with the appliance is referred to its own Service Organisation.

8.

Whilst the Company has endeavoured to ensure the accuracy of the data within this publication they 
cannot hold themselves responsible for any inconvenience or loss occasioned by any error within.

INDEX

Safety Notes & General Servicing Advice  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Console Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

Programme Guide  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6 - 7

Setting the Water Hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Component Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9 - 13

Fault Codes & Diagnostics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14 - 19

Wiring Diagram - models fitted with DEA601 Power Module . . . . . . . . . . . . . . . . . . . . . . 20

Wiring Diagram - models fitted with DEA602 Power Module . . . . . . . . . . . . . . . . . . . . . . 21

Power Module photo  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Module Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23 - 24

Dismantling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25 - 30

General Dishwashing Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31 - 34

Production Changes

DEA602 Power Module Introduced:

FDM550P.R - from Serial Number 91231.9999
FDM554P.R - from Serial Number 91023.9999

Standby Function Added:

All Models from March 2010

Содержание 54445




































Отзывы: