8
GB
• If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese on top of the pizza
halfway through the cooking process.
Planning cooking with the electronic
programmer
Setting the clock
After the appliance has been connected to the
power supply, or after a blackout, the display will
automatically reset to 0:00 and begin to blink. To set
the time:
1. Press the COOKING TIME button
and the
COOKING END TIME
simultaneously.
2. Within 4 seconds of having pressed these buttons,
set the exact time by pressing the
and
buttons.
The
button advances the hours and the
button
decreases the hours.
Once the time has been set, the programmer
automatically switches to manual mode.
Setting the timer
The timer enables a countdown to be set, when the
time has elapsed a buzzer sounds.
To set the timer proceed as follows:
1. press the TIMER button
. The display shows:
.
2. Press the
and
buttons to set the desired time.
3. When the buttons are released the timer begins
counting down and the current time appears on the
display.
4. After the time has elapsed a buzzer will sound, and
this can be switched off by pressing any button (except
the
and
buttons). The symbol
will switch off.
!
The timer does not switch the oven on or off.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings, use
the
button to adjust the volume of the alarm buzzer.
Setting the cooking time with a delayed start
First decide which cooking mode you wish to use and
set a suitable temperature using the SELECTOR and
THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button
.
2. Within 4 seconds of having pressed this button, set
the desired amount of time by pressing the
and
buttons. If, for example, you wish to set a cooking time
of 30 minutes, the display will show:
3. 4 seconds after the buttons are released, the current
time (for example 10.00) reappears on the display with
the symbol
and the letter A (AUTO).
Next the desired cooking end time must be set:
4. Press the END COOKING TIME button
.
5. Within 4 seconds of having pressed this button,
adjust the cooking end time by pressing the
and
buttons. If, for example, you want cooking to end at
13.00, the display shows:
6. 4 seconds after the buttons are released, the current
time (for example 10.00) reappears on the display with
the letter A (AUTO).
At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30 minutes,
at 13.00.
Setting the cooking time with an immediate start
Follow the above procedure for setting the cooking time
(points 1-3).
!
When the letter A appears, this indicates that both
the cooking time and the end cooking time have been
programmed in AUTO mode. To restore the oven to
manual operation, after each AUTO cooking mode
press the COOKING TIME
and END COOKING
TIME
buttons simultaneously.
!
The symbol
will remain lit, along with the oven, for
the entire duration of the cooking programme.
The set cooking duration can be displayed at any time
by pressing the COOKING TIME button
, and the
cooking end time may be displayed by pressing the
END COOKING TIME button
. When the cooking time
has elapsed a buzzer sounds. To stop it, press any
button apart from the
and
buttons.
Cancelling a previously set cooking programme
Press the COOKING TIME button
and the COOKING
END TIME
simultaneously.
Correcting or cancelling previously set data
The data entered can be changed at any time by
pressing the corresponding button (TIMER, COOKING
TIME or COOKING END TIME) and the
or
button.
When the cooking time data is cancelled, the cooking
end time data is also cancelled automatically, and vice
versa.
If the oven has already been programmed, it will not
accept cooking end times which are before the start of
the programmed cooking process.
