8 of 24
Service Manual UK
Indesit
Company
English
High Heat (B1)
Selects the high heat option with both heater elements enabled.
If high heat selected pressing this button selects low heat with only the top heater enabled.
Post Crease Care (B2)
Selects Post Crease Care phase to occur after dryer finishes the cool tumble phase.
If this option not selected the drying programme ends after the cool tumble phase.
Start/Pause (B4)
This button is used to start every programme or to continue a programme if the door has been opened
and then closed, or if there has been a power interruption.
Pressing and holding in this button for more than 1 second when a programme is running cancels the
programme.
After this button is pressed and the programme has started only the Alarm, Pre Crease Care (if delay
running) and Post Crease Care options can be changed. The other switches and the selector switch
can not modify the programme that is running.
On/Off (B5)
This button turns on the user interface and allows a programme and options to be selected. If the
button is pressed when interface is 'On' it stops the dryer and when pressed again the dryer starts.
Pre Crease Care (B6)
This button selects the pre crease care program to operate during the delayed start period, cannot be
selected if a delay programme has not been selected.
Time Delay (B7)
Selected programmes can be delayed from starting for up to 18 hours.
Each time the delay button is pressed the delay duration is increased by 1 hour.
The delay time is displayed on the 2 seven segment LED displays as the number of hours remaining
before the programme selected starts.
Child Lock (B8)
Button and lamp.
Press and hold the button (until the lamp is lit), after selecting the programmes and any options.
This option will prevent the setting from being changed.
Hold the button to cancel the option (until the lamp goes out).
