Hotel Fitness HF-FMXMLT.0, Руководство пользователя

Страница: 6 / 28

6
1.
Attach the Stabilizer (13) to the Base (10) with
two M10 x 19mm Screws (83), two M10 x
66mm Bolts (34), and two M10 Locknuts (38).
1
10
38
34
83
13
ASSEMBLY
To make assembly easier, carefully read the fol-
lowing information and instructions:
• Assembly requires two persons.
• Because of its weight and size, the strength
equipment should be assembled in the location
where it will be used. Make sure that there is
enough clearance to walk around the strength
equipment as you assemble it. If attaching an
additional station to the column, leave enough
clearance for that station.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, see the PART
IDENTIFICATION CHART on page 5.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
one torque wrench (not shown)
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Before beginning assembly, make sure
that you understand the information in
the box above. Note: Some parts
described in the assembly steps may be
preassembled.
IMPORTANT: To prevent interference, the
LEG DEVELOPER must be positioned on
the right of the PRESS STATION (model
number HF-FMXMTT.0).