9
Control unit standby
Open the settings menu by simultaneously pressing the locations of the buttons -,
MENU and +. Press for 5-seconds.
Settings the remote use and safety switch
Set the remote use (rc) ON/OFF with - and + buttons.
Confirm the selection with the MENU button.
Set the safety switch (SAFE) ON/OFF with - and + buttons.
Confirm the selection with the MENU button.
When remote use is ON the menu will show setting for pause time (rest). Enable or
disable the pause time feature with b and -. Pause time must be enabled, if
the control unit is remotely started by an automated scheduled (e.g. a weekly timer).
Press the menu button till SET2 appears in the screen.
Change the temperature unit
with the - and + buttons.
The options are Fahrenheight (FAHR)* and Celsius (CELS).
Press the MENU button to accept the set. Press the MENU button again and the next
set will appear or the control unit switches to standby mode.
Table 3a. Settings menu structure, additional settings
* Factory Setting
ADDITIONAL SETTINGS
See sections 2.2.3. and 2.3. for further infromation
The buttons do not glow when the control
unit is already in stanby mode.