KDAR Company
4
Specifications
Features & Benefits
Light weight, small size all steel case.
Easy to use.
MIG/MAG ready, regulator and 5’ hose in-
cluded.
Optional spool gun available.
Infinite output voltage level.
Infinite wire feed speed control.
Wire at gun is “cold” when not welding.
Power on indicator light and overload indicator
light equipped.
Fan cooled.
20% duty cycle minimum.
Welds 22 gauge to 3/8” with flux cored wire.
Built in wire feeder with easy to use tension
adjustment lever.
Dual size groove drive roller to fit sizes .23”
to .35” wire (.6 to .9 mm).
Easy polarity change for switching to and from
gas.
Flux covered (FCAW) set up from the factory,
ready to weld.
Welds steel, aluminum, and stainless (special
gas required for aluminum and stainless).
2 year limited warranty on the machine.
90 day limited warranty on gun and hose.
Comes with the following components.
2 replacement tips
Hex wrench to change wire feed roller.
Gas nozzle for MIG welding.
10# spool adaptor
.
Gas regulator
5’ gas hose
2# Spool .030” Flux Core Wire
Table 1
Rated input
230VAC, 60 hertz, 22 amps
Maximum output open-circuit voltage
35 volts DC
Rated output
130 AMPS@20volts 20%duty cycle
Wire feed rate
59 to 472 in/min (1.5-12m/min)
Specifications of applicable welding
wire
.025”-.030” (0.6-0.8mm) solid steel
.030”-.035” (0.8-0.9mm) Flux-Cored
Welding Wire Spool
8”x2” (200mmx50mm)
4”x2” (100mmx50mm)
Weight
54 lb (26 kg)
Dimensions (Length*Width*Height)
16”x9.6”x14.5” (408x244x367)
