Host ARIDEX Скачать руководство пользователя страница 10

       Don't leave the foam on the fabric for more than 

Cleaning Sofas

       2 to 3 minutes, including brushing time. 

The average three cushion sofa can be cleaned in 

       NOTE:

 Heavier fabrics will withstand more

less than 1 hour. Follow these steps:

       brushing than will delicate fabrics.

       Tip the sofa forward so you can clean its back

       Apply foam for no longer than 30 seconds. 

       side while standing upright rather than while

       Excessive heat from operating the brush unit in

       bending or kneeling. Because the back of 

       the "FOAM" position for too long can result in 

       the sofa receives minimal soil, you will be

       damage to the air valve/solenoid assembly. 

       able to clean larger sections at one time. 

       Adequate cooling will be achieved by brushing 
       in the foam in the "ON" position then switch the 

       Clean the arms and sides of the sofa next.

       brush unit to "OFF" and vacuum the fabric 
       thoroughly.

       Clean the front and top surfaces next.

       NOTE:

 It is very important to have the brush

       Any fringe or apron bordering the bottom of

       unit switch in the OFF position when

       the sofa can be held with one hand and

       vacuuming because the strength of the

       cleaned while holding the brush unit in your

       vacuum is greatly decreased when the brush

       other hand.

       unit is running.

       Clean the cushions last. Place them on top

As you are learning the cleaning technique, especially

       of the waterproof mat and clean the outside

during your first few cleaning jobs, check frequently

       edges along with either the top or bottom.

for wetting of the filter bag. When this bag gets wet it

       Vacuum the foam, turn the cushion  over, 

allows liquid into fans and the motor, which will in

       then clean the opposite side. The brush unit’s

time ruin the motor bearings. The bag will get wet if

       light weight allows you to control the cushion

you are using improper cleaning technique. If the filter

       with one hand while cleaning it with the brush

bag is getting wet, brush the foam more before

       unit in your other hand.

vacuuming, or use less foam.

Cleaning Chairs

With good technique, dust and dirt will collect on the
filter bag with little or no foam buildup in the recovery

A large upholstered lounge chair can be cleaned in

tank. If the bag has been wetted during cleaning,

15 minutes or less.

remove the filter housing from the machine and run
the power unit motor for 1 minute to clean out foam

       If practical, tip the chair forward so it will

and liquid. Rinse the filter bag, shake out excess 

       support itself on its arms. This allows you to

water, and replace.

       clean its back side while standing upright
       rather than while bending or kneeling.

Drying Time

       Because the back of the chair receives
       minimal soil, you will be able to clean larger

We recommend allowing furniture to dry completely

       sections at one time. 

before use. Fabrics vary in drying time, and will take
from 2 to 10 hours to dry. Factors affecting drying

       Place the chair on its side on the waterproof

time include the type of fabric, relative humidity,

       mat, allowing you to work from a standing

and air circulation. 

       position. Clean one side, then turn the chair
       and clean the other side.

       Turn the chair upright and clean the front and
       top surfaces next.

7

Содержание ARIDEX

















































Отзывы: