15
DN08.05.20Rev 00 www.hosseven.com.tr
When the heater is running, check the manifold gas
pressure from the test point. If the gas pressure increases according to the value
set in the gas line, the gas pressure regulator should be used to keep it constant.
Shut off valve should be installed so that the gas pressure does not exceed 35 mbar
in the gas line.
4.3.
Electrical connection system
The electrical connection must be connected to a grounded line. Connect the
device to a 2 A automata. Connection V automat must be 900 mm from the left and
right of the device. Electric cables should be kept away from hot surfaces and places
where burnt gases are discharged.
