1
D. Installation of the Icemaker
CAUTION
Before operating the icemaker, the bin control must be installed correctly.
Failure to properly install the bin control could result in ice backup and unit
damage.
1. Setup
1) Unpack the dispenser or storage bin. If using a storage bin, attach the four adjustable
legs provided (bin accessory) to the bottom of the storage bin.
) Position the dispenser or storage bin in the selected permanent location.
3) Place the icemaker on top of the dispenser or storage bin and secure.
4) Level the icemaker and dispenser or storage bin in both the left-to-right and front-to-rear
directions.
2. Bin Control Installation
Follow instructions below to remove the bin control from the shipping area and install the
bin control.
1) Remove the front frame: Remove the two thumbscrews and lift off.
) Remove the pump suction hose from the plastic pipe.
3) Remove the drain pipe from the plastic pipe.
Pump
Suction
Hose
3
Drain
Pipe
Bin Control
Front F
rame
1
