14
CAUTION
If a gap is left between the bin control and the wall of the dispenser, ice may
get between them and damage the bin control. Therefore, make sure there is
no gap.
1) Make sure the bin control is flush with the dispenser or storage bin wall, then tighten the
thumbscrews.
13) Pull the bin control lead so that there is no slack in the ice drop area, then secure the
hose that the lead runs through with a cable tie.
14) Replace the tank in the icemaker and reconnect the 4 hoses.
15) Replace the front frame and insulation in their correct positions and secure with the
thumbscrews.
16) Replace the panels in their correct positions.
1
Evaporator
Bin Control Lead
Cable Tie
To Control
Box
Plastic Pipe
Hose
