13
CAUTION
The bin control lead is routed through the back of the icemaker. If care is not
taken when removing the tank, the lead could be severed.
6) Pull out the tank only as far as shown in 6.
7) Remove the tape securing the bin control,
then remove the bin control only.
8)
Being careful not to pull the bin control
lead,
remove the tank completely from the
icemaker.
9) Remove the remaining pieces of tape
from the tank and leave the tank out of the
machine for now.
10) Slightly loosen the outer thumbscrews.
11) Slide the thumbscrews into the slots on the bin control bracket. The bin control bracket
is located on the back wall of the icemaker.
4) Remove the float connection hose from the plastic pipe.
5) Remove the tank drain hose from the tank. Although the tank can be removed at this
point, do not remove it yet because the bin control is taped to the tank.
6
Bin Control
5
Tank Drain Hose
10
Thumbscrews
4
Float Connection Hose
11
Slots
