Hoshizaki KM-260BWH, Инструкция по эксплуатации

Страница: 22 / 29

21
1. Cleaning Procedure
1) Dilute 5 fl . oz. (148 ml) of recommended cleaner Hoshizaki “Scale Away” with 1 gallon
(3.8 lit.) of water.
2) Remove the louver. Open the door and remove all ice from the evaporator and the
storage bin.
Note: To remove cubes on the evaporator, move the control switch on the control box
to the “OFF” position and move it back to the “ICE” position after 3 minutes. The
defrost cycle starts and the cubes will be removed from the evaporator.
3) Move the control switch to the “OFF” position.
4) Move the service switch to the “DRAIN” position, then move the control switch to the
“SERVICE” position.
5) After 2 minutes, move the control switch to the “OFF” position.
6) Pour the cleaning solution into the water tank. Move the service switch to the “WASH”
position, then move the control switch to the “SERVICE” position.
7) After 30 minutes, move the control switch to the “OFF” position.
8) Move the service switch to the “DRAIN” position, then move the control switch to the
“SERVICE” position.
9) Move the control switch to the “ICE” position to fi ll the water tank with water.
10) After 3 minutes, move the service switch to the “WASH” position, then move the control
switch to the “SERVICE” position.
11) After 5 minutes, move the control switch to the “OFF” position.
12) Move the service switch to the “DRAIN” position, then move the control switch to the
“SERVICE” position.
13) Repeat steps 9 through 12 three more times to rinse thoroughly.
14) Disconnect the overflow pipe. Next, remove the water tank by removing the two
thumbscrews and pulling the tank towards you slightly and pushing it down. Be careful
to avoid breakage when handling the parts. See Fig. 8.
15) Pull the cube guides (quantity varies depending on model) upward to remove them
from the water tank. They are snapped in place. See Fig. 9.