Hoshizaki KM-260BWH, Инструкция по эксплуатации

Страница: 13 / 29

12
• Allow at least 2” (5 cm) clearance at the right side for proper air circulation and at least
0.6” (15 mm) clearance at top for ease of maintenance and/or service should they be
required.
• Level the icemaker from side to side and front to rear by adjusting the legs. Location
should provide a fi rm and level foundation for the equipment.
D. Setup
NOTICE
Do not place heavy objects exceeding 33 lbs (15 kg) on the top panel.
1) Unpack the icemaker, and remove all shipping cartons, tape, and packing material
BEFORE operating the unit.
2) Position the icemaker in a selected site.
3) Level the icemaker in both the left-to-right and the front-to-rear directions (when installed
with or without legs). See Fig. 2.
4) When installing the unit without legs, the perimeter where the machine touches the
counter should be sealed with silicone to prevent water from leaking under the icemaker.
5) When installing the unit with legs on the bottom, use the four accessory legs adjustable
from 6” (15.2 cm) to 7” (17.8 cm). Screw the legs tightly into the tapped holes in the
base (see Fig. 3). Handle the icemaker carefully not to damage the exterior.
Max. 0.2” (5mm)
[0.3°]
Fig. 2
Tapped Hole
(Leg Mounting)
Base
Adjustable Leg
Fig. 3