manualshive.com logo in svg

Hoshizaki KM-1601MRH/3, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki KM-1601MRH/3 Скачать руководство пользователя страница 48

48

16) Move the control switch to the "ICE" position.

17) Close the cleaning valve.

Note: The icemaker will not operate unless the cleaning valve is completely closed.

18) Replace the front panel in its correct position.
19) Turn on the power supply to fill the water tank with water.
20) Turn off the power supply after 3 minutes.
21) Remove the front panel and fully open the cleaning valve.

22) Move the control switch to the "WASH" position.

23) Replace the front panel in its correct position.
24) Turn on the power supply to rinse off the cleaning solution.
25) Turn off the power supply after 5 minutes.
26) Remove the front panel and insulation panel.
27) Drain the water tank. (See step 5 above.) Replace the removed parts and the insulation 

panel in their correct positions.

Note: Do not replace the insulation panel when you proceed to "2. Sanitizing 

Procedure."

28) Repeat steps 16 through 27 three more times to rinse thoroughly.

Note: If you do not sanitize the icemaker, go to step 9 in "2. Sanitizing Procedure."

2. Sanitizing Procedure - Following Cleaning Procedure

1) Dilute a 5.25% sodium hypochlorite solution (chlorine bleach) with water. (Add 2.5 fl. oz. 

(74 ml) of sanitizer to 5 gal. (19 l) of water).

2) Pour the sanitizing solution into the water tank.
3) Replace the insulation panel and the front panel in their correct positions.

Note: Make sure that the control switch is in the "WASH" position and the cleaning valve 

is open.

4) Turn on the power supply, and start the sanitizing process.
5) Turn off the power supply after 15 minutes.
6) Remove the front panel and the insulation panel.

7) Drain the water tank. See step 5 in "1. Cleaning Procedure." Replace the removed parts 

and the insulation panel in their correct positions.

8) Repeat steps 16 through 27 in "1. Cleaning Procedure" two times to rinse thoroughly.

9) Close the cleaning valve.

10) Move the control switch to the "ICE" position.

11) Replace the front panel in its correct position.
12) Clean the storage bin with water. 
13) Turn on the power supply and start the automatic icemaking process.

Содержание KM-1601MRH/3



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды