manualshive.com logo in svg

Hoshizaki KM-1601MRH/3, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki KM-1601MRH/3 Скачать руководство пользователя страница 2

2

IMPORTANT

Only qualified service technicians should install, service, and maintain the 
icemaker. No service or maintenance should be undertaken until the technician 
has thoroughly read this Service Manual. Failure to service and maintain 
the equipment in accordance with this manual may adversely affect safety, 
performance, component life, and warranty coverage. 

Hoshizaki provides this manual primarily to assist qualified service technicians in the 
service and maintenance of the icemaker. 

Should the reader have any questions or concerns which have not been satisfactorily 
addressed, please call, write, or send an e-mail message to the Hoshizaki Technical 
Support Department for assistance.

HOSHIZAKI AMERICA, INC.
618 Highway 74 South
Peachtree City, GA 30269

Attn: Hoshizaki Technical Support Department

Phone: 1-800-233-1940 Technical Support
 

  (770) 487-2331

Fax:    1-800-843-1056
 

  (770) 487-3360

E-mail: [email protected]

Web Site: www.hoshizaki.com

NOTE: To expedite assistance, all correspondence/communication MUST include the    
   

following information:

    • Model Number 

                                                  

  

    • Serial Number 

                                                  

    • Complete and detailed explanation of the problem.

Содержание KM-1601MRH/3



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды