43
ITALIANO
1) Dopo la rimozione dell’imballaggio, accertare
che la macchina e il deposito di raccolta cubetti
siano in buone condizioni. Qualora sorgano
dubbi in merito, non utilizzare la macchina
ma rivolgersi a personale qualificato. Per le
indicazioni di disimballaggio e installazione
si veda il relativo foglio d’istruzioni allegato al
deposito di raccolta cubetti.
2) Smontare i pannelli della macchina per
accedere al kit accessori e per agevolare
l’installazione.
3) Rimuovere l’imballaggio contenente gli accessori. Verificarne il contenuto secondo
quanto riportato al punto "2. ACCESSORI".
4) Togliere il nastro adesivo che fissa l’interruttore di controllo deposito.
5) Rimuovere dalla parte esterna la pellicola protettiva in plastica. In caso di
esposizione al sole o a fonti di calore, rimuovere la pellicola dopo aver lasciato
raffreddare la macchina.
4. UBICAZIONE
AVVERTENZA
La macchina non è adatta per essere utilizzata all’aria aperta.
La macchina non deve essere ubicata in prossimità di forni, grill o altri apparecchi che producono calore.
La macchina non è adatta per l’installazione in un’area in cui è possibile utilizzare un getto d’acqua.
ATTENZIONE
Il pavimento su cui poggia deve garantire alla macchina una base solida e piana.
AVVISO
Non posizionare alcun oggetto sulla sommità della macchina e davanti alla sfinestratura.
IMPORTANTE
La normale temperatura ambiente d’esercizio deve essere compresa tra 1°C e 40°C. Il collegamento all’approvvigionamento
dell’acqua è solo per acqua fredda. Il prolungato funzionamento della macchina con valori che non rientrano nelle gamme
previste può comprometterne la capacità di produzione.
Lasciare uno spazio equivalente a quello sotto specificato in modo da favorire la circolazione dell’aria e le eventuali operazioni
di manutenzione o servizio.
Parte anteriore
Parte superiore
MACCHINA
30 cm
30 cm
Parte posteriore
Parte anteriore
Parte superiore
MACCHINA
15 cm
15 cm
Vista laterale
(modello raffreddato
ad acqua)
Vista laterale
(modello raffreddato
ad aria)
Parte
poste-
riore
In alcuni ambienti ad alta umidità, all’interno della macchina potrebbe formarsi della condensa che si riversa poi sul
pavimento. Non installare la macchina su un pavimento che potrebbe danneggiarsi a causa dell’acqua.
a) Coperchio anteriore: rimuovere la vite o le viti.
Sollevare e tirare verso di sé.
b) Pannello superiore: rimuovere la vite o le viti.
Sollevare.
c) Pannello laterale: rimuovere la vite o le viti.
Far scorrere leggermente in
avanti, quindi sollevare.
d) Pannello posteriore: non è necessario rimuoverlo.
c
a
b
c
Interruttore
comando deposito
di raccolta cubetti