5
2A9096-010
14) Slide the bell connectors into the protective sleeve removed in step 8, then fold the protective sleeve and secure using a nylon tie
provided in this kit. See Fig. 16.
15) Remove the wire harness receptacle cap, then plug the heated condensate pan power cord into the wire harness receptacle.
See Fig. 17. Secure the heated condensate pan power cord to the appliance main power cord with a nylon tie.
16) Place the wiring label provided in this kit, near the wiring label on the appliance. See Fig. 18.
Warning! Confirm that nothing is in
contact with the condensate pan heater.
17) Plug the appliance into the electrical outlet to start the refrigeration process. Do not load product at this time.
Warning! Condensate
pan heater is energized and heating up as soon as the appliance is plugged into the electrical outlet. Do not touch.
18) Once plugged in, check the amp draw of the new condensate pan heater.
Note: The condensate pan heater amperage at 115VAC is 2.2A maximum (starting) and 0.3A minimum (A few min. after startup).
19) Replace all panels in their correct positions.
20) Move the appliance back to its correct position.
21) Allow the appliance to cool to set point before putting product back in.
Fig. 16
Nylon Tie
Folded
Protective
Sleeve
Bell Connectors
Inside
Bell Connectors Inside
Folded Protective Sleeve
Wire Harness Receptacle
Cap
Fig. 17
Heated Condensate
Pan Power Supply
Cord
WIRE COLOR CODE
BK
BLACK
BR
BROWN
BU
BLUE
DBU
DARK BLUE
GR
GREEN
GY
GRAY
LBU
LIGHT BLUE
O
ORANGE
P
PINK
R
RED
V
VIOLET
W
WHITE
Y
YELLOW
BK/W
BLACK/WHITE
CONDENSATE HEATER
3B0115-010
(W)
(BK)
(GR)
CONDENSATE HEATER
POWER CORD
(BK)
(W)
(BK)
(BK)
(GR)
(BK)
(GR)
TO LINE CONNECTION
TO NEUTRAL CONNECTION
This unit has been converted to include a CONDENSATE HEATER.
See the addendum CONDENSATE HEATER wiring schematic below.
HEATER
CONDENSATE HEATER
GND
L
N
115/60/1
WIRE HARNESS
GND
Fig. 18
New
Wiring Label
New
Wiring Label
Current
Wiring Label
Rear
Louver Panel
Model Shown: UF48A
Model Shown: PR46A
Front Panel
Current
Wiring Label
