3
2A9096-010
5) Next, remove the current condensate pan (if applicable) and condensate pan brackets (if applicable), and discard. See Fig. 7.
Specific Instructions for Models: UF48A and WF48A
6) Remove the truss head screw securing the blocking panel to the bottom panel. See Fig. 8. Next, place and level the condensate
pan bracket on the blocking panel, then using the self-drilling hex screws provided in this kit, secure the condensate pan bracket
provided in this kit to the bottom panel as shown in Fig. 9. Note: Verify that the condensate pan bracket is level.
(Adjust as necessary).
Condensate
Pan Bracket
Model Shown: UF48A
Fig. 7
Condensate
Pan
Model Shown: UF60A
Condensate
Pan
Condensate
Drain Hose
Condensate
Drain Hose
Model Shown: UF60A
Fig. 10
Truss Head
Screw
New Condensate
Pan Bracket
Self-Drilling
Hex Screws
Bottom
Panel
Model Shown: UF48A
Bottom
Panel
New Condensate
Pan Bracket
Specific Instructions for Freezer and Prep Table Models (Except UF48A and WF48A Models)
6) Using the self-drilling hex screws, secure the condensate pan bracket to the mounting holes on the bottom panel. See Fig. 10.
Fig. 8
Fig. 9
Blocking
Panel
Bottom
Panel
Self-Drilling
Hex Screws
Blocking
Panel
Mounting
Holes
