2
2A9096-010
5) Secure the new condensate pan bracket provided in this kit, with the self-drilling hex screws provided in this kit to the inner wall of
the lower panel. See Fig. 3.
6) Place the new heated condensate pan on the base of the new condensate pan bracket. See Fig. 4.
7) Place the new condensate drain hose over the condensate drain. See Fig. 5. Note: When placing the new condensate drain hose
into position, be sure that the elbow nor the new condensate drain hose make contact with the heater. (Adjust as necessary).
B. Installation Instructions for Freezer and Prep Table Models
1) On existing models, unplug the appliance from the electrical outlet, then remove all product from the appliance.
2) Move the appliance out to access the rear of the appliance, then lock the casters.
3) On new appliance installation, from the instruction manual, follow and complete all of the installation instructions up to section
"II.F. Glass Door Reversal".
4) Remove the rear louver panel. See Fig. 6.
New Condensate
Pan Bracket
Self-Drilling
Hex Screws
Model Shown: PR46A
Fig. 3
New Condensate
Pan Bracket
Inner Wall
Lower Panel
New Heated
Condensate Pan
Fig. 4
Heater
Model Shown: PR46A
Fig. 5
Heater
New Condensate
Drain Hose
Condensate Drain
New Condensate
Drain Hose
Fig. 6
Rear Louver
Panel
Model Shown: UF48A
Note: Make sure
condensate hose
or elbow does not
make contact
with heater.
