ENGLISH
12
Fig. 7
Front
Rear
[Adjustable leg models]
6) Level the refrigerator/freezer in both the left-to-
right and the front-to-rear directions. To adjust
the height of the unit, turn the adjusters of the
adjustable legs.
CAUTION
The height of the adjustable legs must be within
9 - 12 cm (or 15 - 18). If extended too much,
the legs may become weak or the adjusters can
come off, causing unexpected injuries.
5. SHELF AND RAIL
[a] SHELF AND SHELF CLIP (standard)
* The shelf is adjustable in 2.5 cm increments. Adjust
the shelf clips according to the height of stored
items.
* To attach the shelf clip, insert the upper tab into
an adjust hole in the shelf post to hook the shelf
clip, and push the lower tab into another adjust
hole until it locks in place. To detach the shelf clip,
reverse the above procedure.
CAUTION
Attach the shelf clips properly to make the shelf
level.
* To lay the shelf at the bottom of the cabinet, attach
two shelf holders each to the left and right frames
as shown below.
Fig. 4
Spacer
Spanner
Fig. 5
Adjustable Leg
Adjuster
Leg Height
Longer Shorter
IMPORTANT
Do not put anything at the bottom of the cabinet
to prevent damage or deformation to the
cabinet bottom, resulting in corrosion.
[b] RAIL (customized)
* To attach the rail, (1) push the rail hook backwards
to fit into the square hole in the rear shelf post, and
(2) push the rail hook down to fit into the square
hole in the front shelf post. To detach the rail,
reverse the above procedure. See Fig. 8.
CAUTION
Attach the rail properly to make it level.
Fig. 6
Shelf Clip
Shelf Post
Push
Hook
into the caster joints. Use the spanner (accessory)
to loosen or tighten the casters. After making the
unit level, tighten the casters securely. Lock the
stoppers of the front casters.
Содержание HFE-127B Series
Страница 23: ......
