Hoshizaki HFE-127B Series, Инструкция по эксплуатации

Страница: 15 / 24

ENGLISH
11
4. SET UP
IMPORTANT
1. Do not tilt the unit more than 45° when
mounting the legs or casters.
2. Carry the unit by holding its bottom.
3. Remove all stuff inside the cabinet before
moving the unit.
1) Cut the vinyl shipping tape and remove the carton.
2) Take out the accessory shelves and shelf clips.
Attach the four shelf clips horizontally to the shelf
posts. Place the shelf on the shelf clips.
3) Before operating the unit, remove all shipping
carton, packing, tape(s) and protective plastic
film on the exterior. Be careful not to damage the
exterior panels.
4) Position the unit in a selected site.
5) Clean the interior with a soft cloth soaked in cold
or warm water containing the proper amount of
neutral cleaner and wrung dry.
[Caster models]
6) Level the refrigerator/freezer in both the left-to-
right and the front-to-rear directions. To adjust the
height of the unit, insert the spacers (accessory)
* Protect the unit from tipping over by fixing the four
legs with the following tip-resistant kit (optional):
[Tip-resistant kit]
Adjustable leg (4Y2042-01, optional) 4
Shakeproof leg (454440-01, optional) 4
Shakeproof fitting (454441-01, optional) 4
Anchor bolt M10 (not provided) 4
[Installation example]
1) Replace the casters/adjustable legs with the
optional adjustable legs.
2) Replace the adjustable ends of the legs with
the shakeproof legs.
3) Fix the two rear shakeproof fittings to the
floor.
4) Mount the refrigerator/freezer on the fixed
shakeproof fittings.
5) Fix the front shakeproof fittings.
* Locate and orient the fittings to optimize the
function of the anchor bolts.
* The shakeproof legs will raise the height by
about 5 mm.
Fig. 2
Min. 30 cm
Min. 100 cm
Fig. 3
Shakeproof
Fitting
Shakeproof Leg
Side View
Bottom View