Hoshizaki HF-128MA, Инструкция по эксплуатации, Страница: 22 / 24

ENGLISH
18
[b] TROUBLES WITHOUT ERROR CODE
INDICATION
1) Unit fails to operate:
(1) Unplugged.
(2) Power failure.
(3) Main power supply disconnected.
2) Poor cooling performance:
(1) Ambient temperature too high (above 43°C).
(2) Door(s) opened too often.
(3) Cabinet temperature setting too high.
(4) Too packed with foods.
(5) Air filter not clean.
(6) Door(s) left open.
3) Condensation around door(s):
(1) Ambient humidity too high.
(2) Door(s) not closed tightly.
4) Noise:
(1) Normal operating sounds of compressor or
condenser fan.
5) Frosting inside compartment:
(1) Ambient humidity too high.
(2) Door(s) opened too often.
(3) Too packed with foods beyond load line.
4. DISPOSAL
When disposing of the refrigerator/freezer, contact
an authorized Hoshizaki service company or a
specialized waste disposal company.
IMPORTANT
The insulation foaming agent used
for the unit body contains flammable
gas cyclopentane. With this in mind,
dispose of the refrigerator/freezer
properly.
5. WARRANTY
Hoshizaki warrants to the original owner/user that all
Hoshizaki branded products shall be free of defects
in material and/or workmanship for the duration of
the “warranty period”. The warranty shall be effective
for one year from the date of installation.
Hoshizaki’s liability under the terms of the warranty
are limited and shall exclude routine servicing,
cleaning, essential maintenance and/or repairs
occasioned by misuse and installations not in
accordance with Hoshizaki guidelines.
3. BEFORE CALLING A SERVICE AGENT
IMPORTANT
1. If the screen on the operation panel indicates
an error code or something seems wrong
with the unit, check for possible causes
according to the following instructions. If the
problem still exists, immediately contact an
authorized Hoshizaki service company.
2. When contacting a service company, let
them know the model name, serial number,
date of installation (see warranty card) and
state of the trouble.
3. Do not attempt to repair the unit yourself.
[a] TROUBLES WITH ERROR CODE INDICATION
Code Possible Cause Remedy
E1 Cabinet sensor
error
Immediately contact an
authorized Hoshizaki service
company.
E2 Evaporator
sensor error
E3 Condenser
sensor error
cH Condenser high
temperature
alarm
Clean the air filter. If the problem
cannot be resolved, immediately
contact an authorized Hoshizaki
service company.
* The code “dEF” is not an error code but indicates
the unit is in defrost cycle.
Guide
Base
Slot
Fig. 18
Air Filter