Hoshizaki HF-128MA, Инструкция по эксплуатации

Страница: 15 / 24

ENGLISH
11
* Protect the unit from tipping over by fixing the four
legs with the following tip-resistant kit (optional):
[Tip-resistant kit]
Adjustable leg (4Y2042-01, optional) 4
Shakeproof leg (454440-01, optional) 4
Shakeproof fitting (454441-01, optional) 4
Anchor bolt M10 (not provided) 4
[Installation example]
1) Replace the casters/adjustable legs with the
optional adjustable legs.
2) Replace the adjustable ends of the legs with
the shakeproof legs.
3) Fix the two rear shakeproof fittings to the
floor.
4) Mount the refrigerator/freezer on the fixed
shakeproof fittings.
5) Fix the front shakeproof fittings.
* Locate and orient the fittings to optimize the
function of the anchor bolts.
* The shakeproof legs will raise the height by
about 5 mm.
Fig. 4
M20 Bolt
Fig. 3
Shakeproof
Fitting
Shakeproof Leg
Side View
Bottom View
4. SET UP
IMPORTANT
1. Do not tilt the unit more than 45° when
mounting the legs.
2. Carry the unit by holding its bottom.
3. Remove all stuff inside the cabinet before
moving the unit.
1) Cut the vinyl shipping tape and remove the
carton.
2) Take out the accessory shelves, shelf clips and
legs. Attach the four shelf clips horizontally to the
shelf posts. Place the shelf on the shelf clips.
3) Remove the two bolts from the bottom of the
unit.
Fig. 2
Min. 30cm
Min. 100cm