Hoshizaki FM-170EE-50-HC, Руководство по обслуживанию

Страница: 24 / 46

21
3) Replace the Front Panel (Left) and Top Panel in their correct position.
4) Open the water supply tap.
5) Connect the power supply and energise.
6) The following should occur in sequence:
a) Water Reservoir will fill.
b) Gear Motor will start.
c) Compressor will start.
IMPORTANT
1. Check the conditions and quality of the ice production.
2. Do not use ice produced in the trial run. It might be contaminated with
foreign matter in the water circuit. Discard or flush down the drain.
3. Clean the Storage Bin before use (see “V. 1. PERIODICAL CLEANING”).
2. PREPARING THE ICEMAKER FOR LONG STORAGE
WARNING
When shutting off the icemaker for an extended time, drain out all water
from the water line and remove ice from the Storage Bin. The Storage Bin
should be cleaned and dried. Drain the icemaker to prevent damage to the
water supply line at sub-freezing temperatures. Shut off the icemaker until
the proper ambient temperature is resumed.
1) Close the water supply tap.
Fig. 8 Fig. 9
Circuit Motor Operation
Breaker (6A) Protector (3A) Switch
Control Box
Front Panel
(Left)
Control Box
Condenser