21
ENGLISH
12) Open the beer circuit.
Rotary type: Turn the keg coupler handle clockwise until it stops.
Vertical type: Push down the keg coupler handle until it locks in place.
Note: If the cleaning tank is provided with a siphon tube, lay the cleaning tank with the ferrule at the top. If not, lay the
cleaning tank with the ferrule at the bottom.
13) Remove the platforms and drain pan and place a bucket under the beer tap.
14) Press the liquid button to dispense water from the liquid nozzle. Repeat a few times until no more water comes out.
Then, press the foam button to dispense water from the foam nozzle. Repeat a few times until no more water comes out.
15) When no more water comes out of the nozzle, keep the beer tap lever in the open position and turn the regulator adjust dial
to set the pressure to “0” (MPa).
16) Close the main valve of the CO2 gas cylinder by turning it clockwise.
17) When CO2 gas stops coming out of the nozzle, press the stop button to close the beer tap.
18) Close the beer circuit.
Rotary type: Turn the keg coupler handle counterclockwise until it stops.
Vertical type: Unlock and lift the keg coupler handle all the way up.
19) Turn the keg coupler counterclockwise
to remove it from the cleaning tank.
20) Turn the keg coupler clockwise to attach it to the beer keg.
Note: Wash the joint between the keg coupler and beer keg if it is not clean.
21) Wash the cleaning tank interior thoroughly, turn the tank upside down to dry, and cap
it tightly for storage.
22) Set the platform on the arms.
23) Press the flush button on the operation panel. Check that the flush lamp goes off and the sold out lamp comes
on.
24) Wipe off moisture from the end of the beer tap nozzles. Clean and attach the nozzle caps (accessory).
Note: Always attach the accessory nozzle caps at the end of dispensing operation or during periods of non-
use to prevent entrance of insects or dirt into the beer tap nozzles.
Keg Coupler Handle
Rotary Type
Vertical Type
Siphon Tube
Provided
Not provided
Keg Coupler Handle
Rotary Type
Vertical Type
Rotary Type
Vertical Type
Rotary Type
Vertical Type
Nozzle Cap
