Hoshizaki Advance F140, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 11 / 185

Advance
11
EN
Pay particular attention to avoid causing any damage to the condenser fins or the fan blades.
If there is a filter, remove the filter to clean it and then replace it. Replace the filter if it is damaged or
too dirty to clean properly.
DOOR/DRAWER GASKETS
A gasket in good condition will prevent humidity and warm air ingress into the cabinet, therefore it is
vital for the good economical running of thecabinet.
POWER CABLE
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent orsimilarly
qualified persons in order to avoid ahazard
.
PREPARATION FOR LONG-TERM PERIODS WITHOUT USE
• Turn off the power at the main isolator or remove the cabinet plug from the socket.
• Remove all food items from the cabinet.
• Clean the cabinet (refer to cleaning section).
• Remove accumulated dust and dirt from the compressor.
• To prevent any unpleasant odours, do not fully close the door.
ATTENTION
When disconnecting the product please be aware that thawing water might drip from the cabinet on
to the floor. This can cause damage to the floor and cause slippery conditions.