Warranty
The product warranty is pursuant to the Danish Sale of Goods Act.The warranty period starts on the day
the product was purchased.
Warranty handling
A defective product must be returned to the place of purchase along with a valid receipt. If the product be
-
comes defective during the warranty period, the product must be returned to the place of purchase.
Warranty disclaimer
Damage or defects resulting from neglect or improper use of the product is not covered by the warranty.
The warranty does not cover force majeure such as lightning, flood, fire or damage occurred during trans
-
port. Warranty cover will be void, if the product’s serial number has been changed, if any modifications
have been made or if a repair has been attempted by any unauthorized service centre.
5
OPERATING INSTTRUCTIONS
Install the heater as shown on page 12 in the manual.
1.
Connect the heater to a 230V ~ 50Hz power outlet.
2.
The switch on the heater is used to control the heater (fig. 1).
3.
Press the button I (fig. 2), the heater will be ready mode.
4.
Press the button O (fig. 2), the heater will be off.
5.
Touch the touch switch one time, the heater will be on 800W.
6.
Touch the touch switch two times, the heater will be on 1300W.
7.
Touch the touch switch three times, the heater will be on 2100W.
8.
Touch the touch switch four times, the heater will be on 2100W and with LED light.
9.
Touch the touch switch five times, the heater will turn on LED light without heat.
10.
Touch the touch switch six times, the heater will be ready mode.
11.
Timer function (when the heater is turned on)
Touch the timer switch one time, the heater will automatically shut down in 30 minutes.
1.
Touch the timer switch two times, the heater will automatically shut down in 60 minutes.
2.
Touch the timer switch three times, the heater will automatically shut down in 90 minutes.
3.
Touch the timer switch four times, the heater will be on continually.
4.
Remote Control
Press the LOW button, the heater will be on 800W.
1.
Press the High button, the heater will be on 1300W.
2.
Press the LOW and High button at the same time, the heater will be on 2100W.
3.
Press the LIGHT button, will turn on the LED light.
4.
Press the “30/60/90 Min” button one time, the heater will automatically shut down in 30 minutes.
5.
Press the “30/60/90 Min” button two times, the heater will automatically shut down in 60 minutes.
6.
Press the “30/60/90 Min” button three times, the heater will automatically shut down in 90 minutes.
7.
Press the “30/60/90 Min” button four times, the heater will be on continually.
8.
Model no.
ZHQ2168SH-RMLED
Art. No.
211-379
Power source
230V AC ~ 50 Hz
Consumption
800/1300/2100W
Protection class
IP 45
Product specifications
fig. 1
fig. 2
Touch-switch
Control panel
Timer-switch
