4
Wiring Box Mounting
The C-Stat wall plate may be fitted directly on to a single gang
steel flush wiring box complying with BS4662, using two M3.5
screws. The C-stat is suitable for mounting on a flat surface only;
it must not be positioned on an unearthed metal surface.
Electrical Connections
All necessary electrical connections should now be made. Flush
wiring can enter from the rear through the aperture in the wall
plate.
A Pattress is supplied to allow mains surface wiring to enter the
unit.
The mains supply terminals are intended to be connected to the
supply by means of fixed wiring.
The C-Stat is mains powered and requires a 3 Amp fused spur.
The recommended cable size is 1.0mm².
The C-Stat is double insulated and does not require an earth
connection, an earth connection block is provided on the
backplate for terminating any cable earth conductors. Earth
continuity must be maintained and all bare earth conductors
must be sleeved. Ensure that no conductors are left protruding
outside the central space enclosed by the backplate.
