Fitting the wall plate
To remove the wall plate from the C-Stat undo the two retaining
screws located on the underside, the wall plate should now be
easily removed. Once the wall plate has been removed from the
packaging please ensure the C-Stat is resealed to prevent
damage from dust, debris etc.
The wall plate should be fitted in a position which allows a total
clearance of at least 50mm around the C-Stat programmable
thermostat.
Direct Wall Mounting
Offer the plate to the wall in the position the C-Stat is to be
mounted and mark the fixing positions through the slots in the
wall plate. Drill and plug the wall, then secure the plate in
position. The slots in the wall plate with compensate for any
misalignment of the fixings.
3
