Horst Welding HLA SNOW DOUBLESHOT HS200, Руководство оператора

Страница: 13 / 20

Horst Welding Page 1 3
SETUP INSTRUCTIONS
Improper installation, operation, or maintenance of this equipment could result in
serious injury or death. FOLLOW ALL SAFETY INSTRUCTIONS IN THIS MANUAL
AND THE PRIME MOVER'S MANUAL(S)
• Refer to the Operator’s Manual(s) for your prime mover and follow the mounting
instructions contained therein
• Connect the hydraulic lines to the prime mover’s hydraulic system
• Ensure that the hose ends and fittings are free of dirt and contamination
•
Once attached, and it is safe to do so, carefully raise the Broadcast Spreader
and cycle either the loader arms or the 3 Point Hitch to check clearances and to
verify that all mounting procedures have been successfully completed
• Refer to the prime mover starting and operating instructions
• Only engage the prime mover’s hydraulic system when it is safe to do so
• Verify that the spinner direction is in a clockwise direction when viewed from
above the spreader regardless if mounted to the front or rear of the prime mover
o If the spinner turns in the wrong direction, the hydraulic connections need
to be reversed by a qualified technician