Horst Welding HLA SNOW DOUBLESHOT HS200, Руководство оператора

Страница: 6 / 20

Horst Welding Page 6
Never use your hands to clear a clogged agitator. Never allow anyone to
reach into the hopper, force objects (i.e. bars, poles, etc.) into the
agitator or spinner, or otherwise come in contact with an agitator or
spinner or with a non-rotating agitator or spinner. Rotating parts can
crush and/or dismember. Keep everyone clear of the spreader until the
prime mover engine is off and the hydraulic pressure has been relieved.
MAINTAIN AND REPAIR EQUIPMENT SAFELY
•
Do not wear loose clothing, or any accessories that can catch in moving parts
•
If you have long hair, cover or secure it so that it does not become entangled in
the equipment
• Work on a level surface in a well-lit area.
• Always lower raised equipment to the ground or securely support it to prevent
unintentional movement
•
Remove and retain the prime mover’s ignition key
•
Use the correct tool for the job at hand. Make sure they are in good condition
for the task required
• Wear the protective equipment specified by the tool manufacturer
• Use care when working on hydraulic systems and understand how to check for
and release trapped hydraulic pressure
WELDING GALVANIZED MATERIAL
•
Only qualified welders should attempt a weld repair on a galvanized component
•
Always ensure proper ventilation, avoid direct contact with zinc oxide smoke,
and proper pre-welding preparation work is required
STAY CLEAR OF ROTATING OBJECTS
Keep hands, feet and clothing away from power driven rotating parts.