horsch Taro 6 SL, Руководство по эксплуатации

Страница: 38 / 70

7 | Operation
38 60026505 • 1 • 09/2020 • en
NOTE
Ø
Make sure before driving on public roads that the machine meets all respect-
ive applicable national road traffic regulations.
Make the following additional adjustments after connecting:
1. Lift the machine.
2. Fold the machine completely, see section Folding in .
3. Switch off the drill controls.
Position of control units
during road travel
Control unit position Floating position Locked position Supply
Unfolding/Folding in
7.2.3 Parking
DANGER
Serious accidents from loss of stability!
Ø
Park the machine only on a level and firm ground.
Ø
Secure the machine with wheel chocks against rolling away before unhitch-
ing.
NOTE
Ø
Clean the machine and prepare properly before parking it for an extended
period; see chapter
Care and Maintenance.
1. Position the machine at a suitable location and set the tractor brake.
2. Lower the machine on the coulter and packer.
3. Insert the wheel chocks
4. Lock the control units.
5. Disconnect hydraulic lines, electric connections and ISOBUS connection and
store in hose compartment.
6. Relieve and uncouple the upper link.
7. Uncouple the tractor link arm and lower it.
8. Depressurise the hydraulic lines, unplug and store them in the hose compart-
ment.
9. Disconnect the pneumatic connections. Open the quick-release locks.