Micro-granulate facility
For machines with twin hopper granulate (e.g.
pesticide, fertiliser) fine grains can be placed in
addition with the micro-granulate facility.
NOTE
The granulate must be more of a granular com-
position. The metering unit is not suitable for
sand or dust-like substances.
The micro-granulate is located in a tank inside
the hopper (200 l).
¾
Unlock to open (a) and turn counterclock-
wise (b).
¾
Turn clockwise to close (c) and lock (a).
a
b
c
Open/close tank (twin hopper version)
The tank must be absolutely leaktight during use!
¾
Always check the cover for leak tightness with
the fan running, after it had been opened.
Micro-granulate is transported to the metering
auger. The required quantity is transported via
the auger and fed to the fan air flow.
1
2
5
7
8
6
3
4
Micro-granulate metering
1 Metering housing/feed
2 Metering auger
3 Hopper empty sensor
4 Gate valve
5 Pressure compensation hoses
6 Calibration bag mounting
7 Metering motor
8
Introduction into fan air flow
Selecting the metering auger
¾
See E-Manager operating instructions.
Adjustment and operation
CAUTION
Risk of injury on the rotating screw
¾
Switch off the micro-granulate facility before
working on the metering auger.
3
2
1
4
70
71
Содержание Pronto 6 NT
