horsch Pronto 6 NT, Руководство по эксплуатации

Страница: 44 / 96

8. Unhitch the machine.
Machines with tractor link arm hitching:
- Release the securing device of the catch-
ing hooks.
- Lower the tractor link arm.
Machines with drawbar eye:
- Release the bolt and move the machine to
clear.
Machines with ball and socket coupling:
- Release the hold-down.
- Lift the drawbar or spherical cap with the
hydraulic cylinder of the drawbar until the
ball has cleared.
9. Depressurise the hydraulic lines and discon-
nect them.
10. Drain the air reservoir if equipped with
pneumatic brake system.
11. Clean the metering units.
12. Close the hopper cover.
13. Store the terminal in dry conditions.
NOTE
Clean the machine and prepare properly before
parking it for an extended period; see chapter
Care and Maintenance.
Parking
DANGER
Serious accidents caused by the machine roll-
ing away!
¾
Before unhitching secure the machine with the
parking brake and/or wheel chocks.
¾
When unhitching machines with pneumatic
brake always disconnect the red connection
(supply line) first.
WARNING
Risk of accident due to insufficient stability
¾
Park the machine only with empty hopper.
¾
Park the machine on a flat and paved surface.
1. Position the machine at a suitable location
and set the tractor brake.
2. Unfold and secure the support.
3. Lower the machine to the support.
Machines with drawbar eye or ball head:
-
Set the shut-off valve on the drawbar to
Road travel/Parking .
- Lower the machine on the support using the
hydraulic cylinder of the drawbar.
4. Pull or operate the parking brake (optional).
5. Secure the machine with wheel chocks
against rolling away. Position the wheel
chocks under the side of the tyres pointing
to the downward slope.
6. Lower the coulter onto the aluminium clips
on the hydraulic cylinders of the coulter bar.
Avoid ground contact.
7. Unplug the brake lines, ISOBUS and lighting
and hook in the bracket.
Attach the cover caps if so equipped.
40