horsch 60021898, Руководство по эксплуатации

Страница: 38 / 61

5. Couple the upper link and secure the bolt with
the cotter pin. Use the position fitting for the
respective tractor.
The bolt is correctly positioned when the ma-
chine is at maximum working depth and the
upper link slightly rises toward the machine.
6. Connect the hydraulic lines if available, see
chapter Hydraulics .
7. Connect the lighting system.
8. Check before starting to drive whether the
machine has been properly connected and
secured.
Adjust connecting mechanism to
tractor
Joker 3 CT/3.5 CT:
The distance of the tractor link arm coupling
points corresponds to category II and category
III. The bolt diameter corresponds to category III.
Joker 4 CT/5 CT/6 CT:
The distance of the tractor link arm coupling
points corresponds to category III. The bolt di-
ameter corresponds to category III. Simple con-
version enables attachment as per category IV.
Joker 4/5/6 CT: Conversion to connecting as
per category IV (with spreading measure -
ment acc. to category III)
Hitching cat. 3
1. Pull out the cotter pin.
2. Pull out the bolt, remove spacer and ball
(cat. III).
3. Assemble the ball (cat. IV) with bolt but with-
out spacer.
4. Secure the bolt with the cotter pin.
Connecting to Mono TG
The machine can be operated in combination
with the Mono TG.
¾
Refer to the operating instructions for the
Mono TG regarding connecting the Mono TG.
34 35