Operation
Whenever working on the machine
pay attention to the associated safety
notes in the chapter "Safety and
prevention of accidents" as well as
the accident prevention instructions!
Commissioning /
Tractor
change
During initial commissioning and when chang-
ing the tractor, the machine must be adapted
to the tractor.
WARNING
Dropping or lowering machine parts can cause
severe crushing injuries etc.!
¾
Instruct persons to leave the danger zone.
¾
Comply with the accident prevention instruc-
tions.
Adjusting the drawbar eye
(workshop work)
NOTE
Observe the assembly and operating instruc-
tions of the manufacturer of the towing facility.
¾
Adjust the height of the drawbar eye via the
flange plate so that the frame is aligned hori
-
zontally when in working position (tightening
torque 560 Nm):
Connecting/Parking
DANGER
Serious accidents when manoeuvring and cou-
pling!
¾
Keep an eye on your environment.
¾
Keep persons (children) out of the manoeu-
vring range of the machine.
¾
Instruct persons to leave the area between
tractor and machine.
¾
No person must be present in the danger zone
when the tractor approaches the machine or
moves away from it!
¾
Trigger movements of the three-point power
jack only from outside the danger zone.
WARNING
Leaking hydraulic fluid can cause serious in
-
juries! Danger of injury by unwanted machine
movements.
¾
Connect and disconnect the hydraulic lines
only when the hydraulics are without pressure
on both tractor and machine.
Connecting
The machine must be properly connected to a
tractor before any machine movements.
DANGER
Serious accidents from loss of stability!
Machines with pneumatic brake:
¾
Do not move the machine without a brake
line connected.
¾
When connecting always connect the
yellow
connection (brake line) first.
30
