36
37
38
39
40
41
42
43
44
Now you can mark off and subsequently shorten the base profile on both
sides of the Duo Plisse to the desired size (photo’s 36 and 37)
Use a metal saw and mitre box to saw
the base profile (photo 38).
Remove possible burrs with a sand
paper. To remove rough burrs you can
use a Stanley knife (photo’s 39 and 40).
Photo’s 41 till 44 show how to shorten the cord in case it’s too long for tensioning. This is necessary when the sides have been shortened to such a size
that the cord tensioners meet each other and because of this can not be tensioned to the right degree in such way.
