HORNER - SUREGRIP INSTRUCTION MANUAL
COMB AND CUTTER SET UP
4
Positioning Your Comb and Cutter
Before you start, ensure the comb screws and tension knob
are slack.
Hold the handpiece so that you are looking at its under side
and so you can clearly see both comb screws.
LONGHORN
NGHO
Place your comb in the
handpiece so that the sharp
side faces the forks and
adjust the comb until the heel
is level with the back edge of
the comb screws.
DO NOT
position the heel of
the comb to the back of the
comb bed.
Tighten the comb screws finger tight, holding the comb in
place. Not too tight, you may need to adjust this further.
